GIGABYTE Z390 AORUS XTREME WATERFORCE 5G Z390/LGA1151/ATX

1. Support for 9th and 8th Generation Intel® Core™ i9 processors/Intel® Core™ i7 processors/Intel® Core™ i5 processors/Intel® Core™ i3 processors/Intel® Pentium® processors/Intel® Celeron® processors in the LGA1151 package
2. Bundled With Pre-tested Intel® Core® i9-9900K Coffee Lake 8-Core, 16-Thread, 3.6 GHz (OC to All Cores 5.1GHz)
3. L3 cache varies with CPU

1. Intel® Z390 Express Chipset

1. 4 x DDR4 DIMM sockets supporting up to 128GB (32GB single DIMM capacity) of system memory
2. Dual channel memory architecture
3. Support for DDR4 4400(O.C.) / 4333(O.C.) / 4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200(O.C.) / 3000(O.C.) / 2800(O.C.) / 2666 / 2400 / 2133 MHz memory modules
4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
6. Support for Extreme Memory Profile (XMP) memory modules

1. 1 x PCI Express x16 slot, running at x16 (PCIEX16)
2. 1 x PCI Express x16 slot, running at x8 (PCIEX8)
3. 1 x PCI Express x16 slot, running at x4 (PCIEX4)
4. 2 x PCI Express x1 slots
5. 1 x M.2 Socket 1 connector for an Intel® CNVi wireless module only (CNVI)

Chipset:

1. 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe x4/x2 SSD support) (M2M)
2. 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 SATA and PCIe x4/x2 SSD support) (M2A)
3. 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 PCIe x4/x2 SSD support) (M2P)
4. 6 x SATA 6Gb/s connectors
5. Support for RAID 0, RAID 1, RAID 5, and RAID 10

1. 1 x Aquantia GbE LAN chip (10 Gbit/5 Gbit/2.5 Gbit/1000 Mbit/100 Mbit) (LAN1)
2. 1 x Intel® GbE LAN phy (10/100/1000 Mbit) (LAN2

1. Realtek® ALC1220-VB codec
2. ESS ES9018K2M DAC and TI OPA1622 operational amplifiers
3. High Definition Audio
4. 2/4/5.1/7.1-channel
5. Support for S/PDIF Out

1. 2 x USB Type-C™ ports on the back panel, with USB 3.1 Gen 2 support

1. 1 x USB Type-C™ port with USB 3.1 Gen 2 support, available through the internal USB header
2. 4 x USB 3.1 Gen 2 Type-A ports (red) on the back panel
3. 4 x USB 3.1 Gen 1 ports (2 ports on the back panel, 2 ports available through the internal USB header)

1. 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)

1. 1 x 24-pin ATX main power connector
2. 2 x 8-pin ATX 12V power connectors
3. 1 x OC PEG power connector
4. 1 x CPU fan header
5. 1 x water cooling CPU fan header
6. 1 x water cooling kit CPU LED header (LED_CPU)
7. 1 x water cooling kit Chipset LED header (LED_PCH)
8. 4 x system fan headers
9. 2 x system fan/water cooling pump headers
10. 2 x addressable LED strip headers
11. 2 x addressable LED strip power select jumpers
12. 2 x RGB LED strip headers
13. 6 x SATA 6Gb/s connectors
14. 3 x M.2 Socket 3 connectors
15. 1 x front panel header
16. 1 x front panel audio header
17. 1 x USB Type-C™ port, with USB 3.1 Gen 2 support
18. 1 x USB 3.1 Gen 1 header
19. 2 x USB 2.0/1.1 headers
20. 1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S module only)
21. 1 x GC-OC Touch add-in card connector
22. 1 x Clear CMOS jumper
23. 2 x temperature sensor headers
24. 1 x power button
25. 1 x reset button
26. 1 x Clear CMOS button
27. 1 x OC button
28. 2 x BIOS switches

1. 2 x SMA antenna connectors (2T2R)
2. 2 x Thunderbolt™ 3 connectors (USB Type-C™ ports, with USB 3.1 Gen 2 support)
3. 4 x USB 3.1 Gen 2 Type-A ports (red)
4. 2 x USB 3.1 Gen 1 ports
5. 2 x USB 2.0/1.1 ports
6. 1 x HDMI port
7. 2 x RJ-45 ports
8. 1 x optical S/PDIF Out connector
9. 5 x audio jacks

BIOS

1. 2 x 128 Mbit flash
2. Use of licensed AMI UEFI BIOS
3. Support for DualBIOS™
4. Support for Q-Flash Plus
5. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

1. Support for Windows 10 64-bit

1. E-ATX Form Factor; 30.5cm x 27.1cm